Braskem PE ADV-2011D Braskem Polyethylene, Linear Low Density

Product Description

The ADV-2011 D resin is a product formulated on Lintech resin basis that allows for obtaining films with high mechanical resistance, excellent weldability, processability and hot tack. Blends with other low-density polyethylene products are not necessary. Using it pure into the extruder is recommended. It contains processing aid, antiblock, antioxidant and slip additives.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Latin America

North America

South America

Additive

Antiblock

Antioxidant

Processing Aid

Slip

Features

General Purpose

Good Processability

Weldable

Uses

General Purpose

Laminates

Packaging

Agency Ratings

Processing Method

Coextrusion

Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)			ASTM D1894
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Strength			ASTM D882
MD: Yield, 0.98 mil, Blown Film		psi
TD: Yield, 0.98 mil, Blown Film		psi
MD: Break, 0.98 mil, Blown Film		psi
TD: Break, 0.98 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 0.98 mil, Blown Film		%
TD: Break, 0.98 mil, Blown Film		%
Dart Drop Impact (0.98 mil, Blown Film)		g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD: 0.98 mil, Blown Film		g
TD: 0.98 mil, Blown Film		g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE ADV-2011D, Braskem PE ADV2011D, Braskem PE , BraskemPEADV2011D, BraskemPE, PEADV 2011 D, ADV, PEADV-2011D, PEADV2011D, PEADV:2011D, PEADV/2011D, PEADV+2011D, PEADV_2011D, PEADV 2011D, PEADV2011, PEADV, ADV 2011 D, ADV-2011D, ADV2011D, ADV:2011D, ADV/2011D, ADV+2011D, ADV_2011D, ADV 2011D, ADV2011, 2011D, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Braskem, PolyethyleneLinearLowDensity, 2011ADV, 2011PEADV
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Extrusion	Nominal Value	Unit
Melt Temperature		°F
Extrusion Notes
Blow Up Ratio: 1.8-3.0:1

Notes

¹Typical properties: these are not to be construed as specifications.

Braskem PE ADV-2011D

Linear Low Density Polyethylene

Supplied by Braskem