IDES Prospector Already have an account? Login Here

IDES

Ultradur® B 4300 G2 High Speed

Polybutylene Terephthalate

Glass Fiber Reinforcement, 10%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultradur® B 4300 G2 High Speed is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Easy flowing injection molding grade with 10 % glass fibers; for rigid, tough and dimensionally stable technical parts (eg timer dials, toggles, knobs, parts for thermostats, oven-door handles, toaster housings and grills).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Good Dimensional Stability
  • Good Flow
  • Good Toughness
Uses 
  • Appliance Components
  • Handles
  • Housings
  • Knobs
  
Agency Ratings 
Appearance 
  • Black
  • Natural Color
  
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PBT
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Apparent Density
g/cm³
 ISO 60
Melt volume-flow rate (250°C/2.16 kg)
in³/10min
 ISO 1133 2
Molding Shrinkage
     ISO 2577 2
Flow
%
  
Across Flow
%
  
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Viscosity number
cm³/g
 ISO 307, 1157, 1628 2
Mold Shrinkage 3
      
Across Flow: 0.12 in
%
  
Flow: 0.12 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Break)
psi
 ISO 527-2 2
Tensile Strain (Break)
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength (73°F)
ft·lb/in²
 ISO 179/1eA 2
Charpy impact strength
     ISO 179/1eU 2
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ISO 75-2 2
66 psi
°F
  
264 psi
°F
  
Melting Temperature 4
°F
 ISO 11357-3 2
Maximum Service Temperature - Short Cycle Operation
°F
  
Electrical
Nominal Value
Unit
Test Method
Volume resistivity
ohm·in
 IEC 60093 2
Relative Permittivity
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
Nominal Value
Unit
Test Method
Automotive Materials (> 39.4 mil)
 
 FMVSS 302
ISO Type
 
 ISO 7792
Polymer Abbreviation
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultradur® B 4300 G2 High Speed, Ultradur B 4300 G2 High Speed, Ultradur® , Ultradur, UltradurB4300G2HighSpeed, B 4300 G 2 High Speed, B 4300 G2 High Speed, B4300, 4300G, G2, 2High, HighSpeed, B4300G2HighSpeed, Polybutylene Terephthalate, PBT, Polyester, BASF, PolybutyleneTerephthalate, 4300B
Features
Features may also be described by the following terms: Good Flow, Good Dimensional Stability, Dimensionally Stable, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Housings, Housing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Suggested Max Moisture
%
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3Free, plate with film gate, 150*150*3 mm
418 °F/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.