IDES Prospector Already have an account? Login Here

IDES

EcoPLUS™ 105

High Density Polyethylene

Supplied by PETRONAS Polymer Technology Center

The technical datasheet with complete property values for EcoPLUS™ 105 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ECOPLUS™ 105 Degradable Polyethylene is a natural high density degradable polyethylene which is suitable for extrusion of a wide variety of film applications. ECOPLUS™ 105 Degradable Polyethylene is based on high density copolymer and it is supplied in pellet form.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Biodegradable
  • Copolymer
  
Uses 
  • Bags
  • Film
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1872-1
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Stress
     ISO 1184
MD: Yield
psi
  
TD: Yield
psi
  
MD
psi
  
TD
psi
  
Tensile Elongation
     ISO 1184
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ISO 7765-1
Additional Information
Nominal Value
Unit
Test Method
Accelerated Weathering Duration - Degredation
month
 ASTM D2565
Migration - of Chemicals 3
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EcoPLUS™ 105, EcoPLUS 105, EcoPLUS™ , EcoPLUS, EcoPLUS105, 105, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PETRONAS, PolyethyleneHighDensity
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screen Pack: 40/80 mesh
Screw Compression Ratio: 2.5:1 to 3.5:1
Notes
1Typical properties: these are not to be construed as specifications.
2Annealed
33% Acetic Acid, 10% Ethanol, Olive Oil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.