IDES Prospector Already have an account? Login Here

IDES

RELENE® 46GP009

High Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® 46GP009 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Relene 46GP009 (PE:63) is a natural coloured grade for pipe extrusion and for pesticide bottles. It possesses bimodal molecular weight distribution, which improves processability. This grade meets the MFI, Density & Hydrostatic Strength requirements of material grade PE:63 as per IS 4984. When incorporated with adequate quantity of carbon black as specified in clause 5.2.3 of IS: 4984, Pipes will meet PE:63 requirements .

This grade has excellent ESCR properties and suitable for pesticide bottles up to 1 litre capacity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Bimodal Molecular Weight Distribution
  • Food Contact Acceptable
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  
Uses 
  • Bottles
  • Piping
  
Agency Ratings 
Appearance 
  • Natural Color
Processing Method 
  • Pipe Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (10% Igepal, Compression Molded, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Compression Molded)
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield, Compression Molded
%
  
Break, Compression Molded
%
  
Flexural Modulus (Compression Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Compression Molded)
 
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Oxidation Induction Time (392°F)
min
 ASTM D3895
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® 46GP009, RELENE 46GP009, RELENE® , RELENE, RELENE46GP009, 46 GP 009, 46GP009, 46GP, GP009, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Reliance, PolyethyleneHighDensity, GP46
Features
Features may also be described by the following terms: Bimodal, Bimodal Molecular Weight Distribution, Bimodal MW Distribution, Good Processability, Easy Processing, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.