IDES Prospector Already have an account? Login Here

IDES

RELENE® 52GB001

High Density (HMW) Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® 52GB001 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
52GB001 is a High Molecular Weight High Density Polyethylene (HMHDPE) blow moulding grade with very good impact strength, stiffness and good ESCR produced. It possesses medium molecular weight distribution and easy processability. 52GB001 can readily be processed on most of the large volume blow moulding machines with accumulators.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  • High Molecular Weight
  • Med.-Wide Molecular Weight Distrib.
Uses 
  • Blow Molding Applications
  • Containers
  
Agency Ratings 
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/10.0 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Compression Molded)
psi
 ASTM D638
Tensile Elongation (Yield, Compression Molded)
%
 ASTM D638
Flexural Modulus (Compression Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Compression Molded)
 
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® 52GB001, RELENE 52GB001, RELENE® , RELENE, RELENE52GB001, 52 GB 001, 52GB001, 52GB, GB001, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, PE, Reliance, PolyethyleneHighDensityHMW, HDPEHMW, GB52
Features
Features may also be described by the following terms: Good Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, Good Processability, Easy Processing, High Molecular Weight, High MW.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.