IDES Prospector Already have an account? Login Here

IDES

RELENE® HD50MA180

High Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® HD50MA180 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HD50MA180 is a high flow High Density Polyethylene (HDPE) grade. This grade is specially formulated to manufacture large, intricate, thin walled multi cavity injection moulded products. It has narrow molecular weight distribution, which makes it easier to process and products manufactured have good gloss and rigidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • High Flow
  • High Gloss
  • High Rigidity
  • Narrow Molecular Weight Distribution
Uses 
  • Household Goods
  • Thin-walled Parts
  
Agency Ratings 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Break, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® HD50MA180, RELENE HD50MA180, RELENE® , RELENE, RELENEHD50MA180, HD 50 MA 180, HD50MA180, HD50, 50MA, MA180, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Reliance, PolyethyleneHighDensity, 50HD
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, High Gloss, High Rigidity, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Household Goods, Housewares.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.