IDES Prospector Already have an account? Login Here

IDES

RELENE® 1003FA20

Low Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® 1003FA20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
1003FA20 is a film grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. It has been specially designed for the production of film with good environmental stress crack resistance, mechanical and impact resistance. Film produced from this grade is ideally suitable for heavy duty applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • High ESCR (Stress Crack Resist.)
Uses 
  • Agricultural Applications
  • Film
  • Shrink Wrap
  • Wire & Cable Applications
  
Agency Ratings 
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D882
MD: Break, 1.6 mil, Blown Film
psi
  
TD: Break, 1.6 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.6 mil, Blown Film
%
  
TD: Break, 1.6 mil, Blown Film
%
  
Dart Drop Impact (1.6 mil, Blown Film)
g
 ASTM D1709A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® 1003FA20, RELENE 1003FA20, RELENE® , RELENE, RELENE1003FA20, 1003 FA 20, 1003FA20, 1003FA, FA20, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Reliance, PolyethyleneLowDensity, FA1003
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications, Shrink Wrap.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.