IDES Prospector Already have an account? Login Here

IDES

RELENE® 1070LA17

Low Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® 1070LA17 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
1070LA17 is an extrusion coating grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. This grade is specially developed for extrusion coating on different substrates and contains no additives. It exhibits excellent drawdown characteristics maintaining good adhesion, with very low neck-in even at high line speeds. It can also be easily processed into thin gauge films for adhesive lamination and heat pressure lamination.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Adhesion
  • Good Drawdown
  • Good Processability
  • Low Neck-In
Uses 
  • Coating Applications
  • Film
  • Laminates
Agency Ratings 
Processing Method 
  • Extrusion Coating
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D882
MD: Break, 1.6 mil, Blown Film
psi
  
TD: Break, 1.6 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.6 mil, Blown Film
%
  
TD: Break, 1.6 mil, Blown Film
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® 1070LA17, RELENE 1070LA17, RELENE® , RELENE, RELENE1070LA17, 1070 LA 17, 1070LA17, 1070LA, LA17, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Reliance, PolyethyleneLowDensity, LA1070
Features
Features may also be described by the following terms: Good Drawdown, Good draw down, Good Adhesion, Low Neck-in, Low Neck In, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.