RELENE 24FS040 Reliance Polyethylene, Low Density

Product Description

24FS040 is a film grade Low Density Polyethylene (LDPE) produced by high pressure tubular process. It can be extruded with considerable ease on any conventional LDPE extruder. The polymer has been blended with necessary additives during manufacture to obtain good surface slip and easy openability between two layers of the film.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Additive

High Slip

Features

Food Contact Acceptable

General Purpose

High Slip

Uses

Bags

General Purpose

Packaging

Agency Ratings

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D882
MD: Break, 1.6 mil, Blown Film		psi
TD: Break, 1.6 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 1.6 mil, Blown Film		%
TD: Break, 1.6 mil, Blown Film		%
Dart Drop Impact (1.6 mil, Blown Film)		g	ASTM D1709A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® 24FS040, RELENE 24FS040, RELENE® , RELENE, RELENE24FS040, 24 FS 040, 24FS040, 24FS, FS040, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Reliance, PolyethyleneLowDensity, FS24
Features
Features may also be described by the following terms: High Slip.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).

Notes

¹Typical properties: these are not to be construed as specifications.

RELENE® 24FS040

Low Density Polyethylene

Supplied by Reliance Industries Limited