RELENE F18010 Reliance Polyethylene, Linear Low Density

Product Description

F18010 is a butene comonomer based Linear Low Density Polyethylene (LLDPE), without antiblock and slip additives. The grade is designed for manufacturing for lamination film application.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Features

Butene Comonomer

Food Contact Acceptable

Uses

Film

Laminates

Agency Ratings

Processing Method

Blown Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D882
MD: Yield, 1.6 mil, Blown Film		psi
TD: Yield, 1.6 mil, Blown Film		psi
MD: Break, 1.6 mil, Blown Film		psi
TD: Break, 1.6 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 1.6 mil, Blown Film		%
TD: Break, 1.6 mil, Blown Film		%
Dart Drop Impact (1.6 mil, Blown Film)		g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD: 1.6 mil, Blown Film		g
TD: 1.6 mil, Blown Film		g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® F18010, RELENE F18010, RELENE® , RELENE, RELENEF18010, F 18010, F18010, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Reliance, PolyethyleneLinearLowDensity, 18010F
Features
Features may also be described by the following terms: Butene Comonomer.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).

Notes

¹Typical properties: these are not to be construed as specifications.

RELENE® F18010

Linear Low Density Polyethylene

Supplied by Reliance Industries Limited