IDES Prospector Already have an account? Login Here

IDES

RELENE® LL20DS010

Linear Low Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® LL20DS010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL20DS010 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), for Drip lateral applications. Drop laterals produced out of this grade has outstanding processability and, tensile and elongation properties compared to that of a conventional LLDPE grade. This grade meets the requirements of material as per IS 12786:1989 on 'Irrigation equipment-Polyethylene pipes for irrigation laterals-specification". When incorporated with adequate quantity of carbon black as specified in clause 4.1 of IS 12786:1989, the pipe made from this grade will meet the creep rupture stresss requirement of PE-25 class of pipe.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Butene Comonomer
  • Food Contact Acceptable
  • General Purpose
  • Good Processability
  
Uses 
  • General Purpose
  • Packaging
  • Piping
Agency Ratings 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield, Injection Molded
%
  
Break, Injection Molded
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® LL20DS010, RELENE LL20DS010, RELENE® , RELENE, RELENELL20DS010, LL 20 DS 010, LL20DS010, LL20, 20DS, DS010, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Reliance, PolyethyleneLinearLowDensity, 20LL
Features
Features may also be described by the following terms: Butene Comonomer, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.