IDES Prospector Already have an account? Login Here

IDES

RELENE® LL20FS020

Linear Low Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® LL20FS020 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL20FS020 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE) with optimum levels of antioxident, antiblocking agent & slip additives. The grade is designed to make blown film for general purpose application & blending with LDPE.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock
  • Antioxidant
  • Slip
Features 
  • Antiblocking
  • Antioxidant
  • Butene Comonomer
  • Food Contact Acceptable
  • General Purpose
  • Slip
Uses 
  • Bags
  • Blending
  • General Purpose
Agency Ratings 
Processing Method 
  • Blown Film
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D882
MD: Break, 1.6 mil, Blown Film
psi
  
TD: Break, 1.6 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.6 mil, Blown Film
%
  
TD: Break, 1.6 mil, Blown Film
%
  
Dart Drop Impact (1.6 mil, Blown Film)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 1.6 mil, Blown Film
g
  
TD: 1.6 mil, Blown Film
g
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® LL20FS020, RELENE LL20FS020, RELENE® , RELENE, RELENELL20FS020, LL 20 FS 020, LL20FS020, LL20, 20FS, FS020, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Reliance, PolyethyleneLinearLowDensity, 20LL
Features
Features may also be described by the following terms: Butene Comonomer, Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.