IDES Prospector Already have an account? Login Here

IDES

RELENE® LL36RA045

Linear Medium Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® LL36RA045 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL36RA045 is a Butene Comonomer based Linear Medium Density Polyethylene. This grade when blended with appropriate carbon black can withstand continuous exposure. LL36RA045 when pulverised into 20-30 mesh powder offers good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of hardness and impact strength. This grade contains normal dose of antioxidant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Butene Comonomer
  • Food Contact Acceptable
  • Good Impact Resistance
  • High ESCR (Stress Crack Resist.)
  • High Hardness
Uses 
  • Tanks
Agency Ratings 
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (10% Igepal, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.0787 in, Compression Molded)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus (0.126 in, Compression Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® LL36RA045, RELENE LL36RA045, RELENE® , RELENE, RELENELL36RA045, LL 36 RA 045, LL36RA045, LL36, 36RA, RA045, Polyethylene, Linear Medium Density, Polyethylene Linear Medium Density, LMDPE, Polyethylene, PE, Reliance, PolyethyleneLinearMediumDensity, 36LL
Features
Features may also be described by the following terms: Butene Comonomer, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Hardness, Hard, Good Impact Resistance.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.