IDES Prospector Already have an account? Login Here

IDES

RELENE® M24300

Linear Low Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® M24300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M24300 is a butene comonomer based Linear Low Density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers good fluidity and excellent processability, and is mainly recommended for preparing masterbatch. It can be also used for producing injection moulded lids, containers, houseware & general purpose articles as this grade exhibits good flexibility and low warpage.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Butene Comonomer
  • Food Contact Acceptable
  • General Purpose
  • Good Flexibility
  • Good Processability
  • High Flow
  • Low Warpage
  • Narrow Molecular Weight Distribution
Uses 
  • Containers
  • General Purpose
  • Household Goods
  • Lids
  • Masterbatch
Agency Ratings 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (Injection Molded, F0)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Break, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® M24300, RELENE M24300, RELENE® , RELENE, RELENEM24300, M 24300, M24300, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Reliance, PolyethyleneLinearLowDensity, 24300M
Features
Features may also be described by the following terms: Butene Comonomer, Narrow Molecular Weight Distribution, Narrow MW Distribution, High Flow, High Melt, High MFI, Good Processability, Easy Processing, Good Flexibility, Flexible, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.