IDES Prospector Already have an account? Login Here

IDES

RECONYL B GV15 9011/U

Polyamide 6

Glass Fiber Reinforcement, 15%

Supplied by FRISETTA Polymer GmbH

The technical datasheet with complete property values for RECONYL B GV15 9011/U is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Recycled nylon 6 for injection moulding, 15% glass fibres reinforced (available only in black)
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
Recycled Content 
  • Yes
Features 
  • High Stiffness
Uses 
  • Housings
Appearance 
  • Black
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Saturation, 73°F
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
Temperature Index 2
°F
 IEC 60216
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RECONYL B GV15 9011/U, RECONYL B GV15 9011U, RECONYL , RECONYLBGV159011U, B GV 15 9011, B GV15 9011, B GV 15 9011 U, BGV159011, B GV15 9011/U, B GV15 9011U, B GV15 9011:U, B GV15 9011+U, B GV15 9011-U, B GV15 9011_U, B GV15 9011 U, BGV, GV15, 159011, 9011U, BGV159011U, BGV159011_U, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Frisetta, Polyamide6, Nylon6, GVB
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Stiffness.
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Granular Clamp: <0.1%
Build-up Pressure (hydraulic): 5 to 10 bar
Notes
1Typical properties: these are not to be construed as specifications.
250% reduction in tensile strength after 20000 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.