IDES Prospector Already have an account? Login Here

IDES

Pro-fax EP390P

Polypropylene Impact Copolymer

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Pro-fax EP390P is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Pro-fax EP390P is a high flow polypropylene heterophasic copolymer resin. This resin has minimal stabilization, which allows wide design latitude for the compounder. Additional suitable stabilization is required to protect the resin during melt processing and throughout its useful life. For regulatory compliance information see Pro-fax EP390P Regulatory Affairs Product Stewardship Information/Certification Data Sheet (RAPIDS).
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Stiffness
  • High Flow
  • Impact Copolymer
  • Low Temperature Impact Resistance
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus - 1% Secant 3
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256A
Drop Impact Resistance (-20°F)
ft·lb
 Internal Method
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Pro-fax EP390P, Profax EP390P, Pro-fax , Profax, Pro:fax, Pro/fax, Pro+fax, Pro_fax, Pro fax, ProfaxEP390P, EP 390 P, EP390P, EP390, 390P, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneImpactCopolymer, PPImpactCopolymer, 390EP
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Impact Copolymer, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Stiffness.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.039 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.