IDES Prospector Already have an account? Login Here

IDES

YUPLENE® BX3910

Polypropylene Impact Copolymer

Supplied by SK Corporation

The technical datasheet with complete property values for YUPLENE® BX3910 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
YUPLENE BX3910 is a high crystalline propylene impact copolymer designed for injection molding applications. YUPLENE BX3910 has excellent properties in stiffness, flow, mechanical properties, heat resistance and impact strength, which make YUPLENE BX3910 suitable for auto parts, electric appliances, large size containers, thin wall and very high speed injection applications. This is not a chemical cracked grade so it is free from surface gas mark. YUPLENE BX3910 can reduce various injection problems such as surface trouble, shrink, warpage etc. and reduce the cycle time of injection molding due to rapid crystallization.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Crystalline
  • Good Flow
  • Good Impact Resistance
  • Good Stiffness
  
Uses 
  • Appliances
  • Automotive Applications
  • Containers
  • Electrical/Electronic Applications
  • Industrial Applications
  • Thin-walled Parts
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Spiral Flow Length
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-4°F
ft·lb/in
  
73°F
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUPLENE® BX3910, YUPLENE BX3910, YUPLENE® , YUPLENE, YUPLENEBX3910, BX 3910, BX3910, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, SK Corporation, PolypropyleneImpactCopolymer, PPImpactCopolymer, 3910BX
Features
Features may also be described by the following terms: Good Flow, Good Impact Resistance, Good Stiffness.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.