IDES Prospector Already have an account? Login Here

IDES

YUCLAIR® FT411

Linear Low Density Polyethylene

Supplied by SK Corporation

The technical datasheet with complete property values for YUCLAIR® FT411 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
YUCLAIR FT411 is a butene-1 copolymer which has good physical properties and low gel & fish-eye.
YUCLAIR FT411 has been specifically designed for use in hand wrap, food wrap, and packaging film where product qualities are absolutely essential for demanding casting processes.
YUCLAIR FT411 complies with FDA regulation 21 CFR 177.1520, 178.2010 when used unmodified and according to good manufacturing practices for food contact applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Butene Comonomer
  • Food Contact Acceptable
  • Low Gel
Uses 
  • Cast Film
  • Film
  • Food Packaging
  • Packaging
 
Agency Ratings 
 
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
ASTM D374
Secant Modulus
    ASTM D882
MD: 1.2 mil
psi
 
TD: 1.2 mil
psi
 
Tensile Strength
    ASTM D882
MD: Yield, 1.2 mil
psi
 
TD: Yield, 1.2 mil
psi
 
MD: Break, 1.2 mil
psi
 
TD: Break, 1.2 mil
psi
 
Tensile Elongation
    ASTM D882
MD: Break, 1.2 mil
%
 
TD: Break, 1.2 mil
%
 
Dart Drop Impact (1.2 mil)
g
ASTM D1709
Elmendorf Tear Strength
    ASTM D1922
MD: 1.2 mil
g
 
TD: 1.2 mil
g
 
Optical
Nominal Value
Unit
Test Method
Haze
%
ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUCLAIR® FT411, YUCLAIR FT411, YUCLAIR® , YUCLAIR, YUCLAIRFT411, FT 411, FT411, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, SK Corporation, PolyethyleneLinearLowDensity, 411FT
Features
Features may also be described by the following terms: Low Gel, Butene Comonomer.
Uses
Uses may also be described by the following terms: Food Packaging, Cast Film.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.