IDES Prospector Already have an account? Login Here

IDES

Daicel PP FP994

Polypropylene

Glass Fiber Reinforcement, 25%

Supplied by Daicel Polymer Ltd.

The technical datasheet with complete property values for Daicel PP FP994 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 25% Filler by Weight
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Good Stiffness
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Ball Pressure Test
°F
 
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0295 in)
 
UL 94
UL File Number
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daicel PP FP994, Daicel PP , DaicelPPFP994, DaicelPP, PPFP 994, PPFP994, PP, FP 994, FP994, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, Daicel Polymer, PolypropyleneUnspecified, PPUnspecified, 994FP, 994PPFP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Stiffness.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.