IDES Prospector Already have an account? Login Here

IDES

Eltex® P HEY500

Polypropylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for Eltex® P HEY500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Eltex® P HEY500 is specially developed for extrusion and co-extrusion coating applications in which high speeds with various substrates are involved. Eltex® P HEY500 is a modified polypropylene with excellent processing properties.

Materials such as paper and board, coated with Eltex® P HEY500 have high grease and temperature resistance. They can be submerged in boiling water for a certain period of time without deterioration. Eltex® P HEY500 can be used in microwave oven applications. Even with a considerably low coating weight a practically pinholes-free coating can be achieved.

Applications:
Eltex® P HEY500 is a very versatile general coating grade for:
  • Coating and lamination of various papers
  • Paperboards
  • Plastic films and foils

Eltex® P HEY500 has good adhesion against OPP and woven PP cloth and can therefore be used in woven PP fabric applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Adhesion
  • Good Processability
  • Grease Resistant
  • High Heat Resistance
  
Uses 
  • Film
  • Paper Coatings
  • Textile Applications
RoHS Compliance 
Processing Method 
  • Coating
  • Coextrusion
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Eltex® P HEY500, Eltex P HEY500, Eltex® P , Eltex P, EltexPHEY500, EltexP, PHEY 500, PHEY500, HEY 500, HEY500, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Ineos Polyolefins, PolypropyleneUnspecified, PPUnspecified, 500HEY, 500PHEY
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Heat Resistance, Good Processability, Easy Processing, Good Adhesion.
Uses
Uses may also be described by the following terms: Paper Coatings, Paper Coating.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Feed-block temperature: 305°C
Nip distance: 105 to 220 mm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.