INEOS LDPE 19N930 Ineos Polyolefins Polyethylene, Low Density

Product Description

19N930 is a low-density polyethylene intended for injection molding. It is a medium MFR material, having good flow properties and allowing short cycle time. The moulded article is characterized by low degree of built-in stress, good stiffness, low warpage and high gloss.

Applications:
19N930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for products like caps and closures, household goods and toys.

General

Material Status

Commercial: Active

Availability

Europe

Features

Fast Molding Cycle

Good Flexibility

Good Stiffness

High Gloss

Low Density

Low Warpage

Medium Flow

Uses

Caps

Closures

Hospital Goods

Toys

RoHS Compliance

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density²		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/0.325 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield, Compression Molded		psi
Break, Compression Molded		psi
Tensile Strain (Break, Compression Molded)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (-4°F)		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, Compression Molded)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature		°F	DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 19N930, INEOS LDPE , INEOSLDPE19N930, INEOSLDPE, LDPE 19 N 930, LDPE19N930, LDPE19, LDPE, 19 N 930, 19N930, 19N, N930, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, N19, 19LDPE
Features
Features may also be described by the following terms: High Gloss, Medium Flow, Medium Melt, Medium MFI, Low Density, Low Specific Gravity, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Stiffness, Low Warpage, Low Warp, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.

Notes

¹Typical properties: these are not to be construed as specifications.

²Conditioned according to ISO 1872/1

INEOS LDPE 19N930

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe