IDES Prospector Already have an account? Login Here

IDES

INEOS LDPE 24F564

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LDPE 24F564 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
24F564 is an autoclave LDPE grade developed for lamination film and general packaging film. 24F564 gives film with good optical properties and low gel level for medium duty film.

Applications:
24F564 is intended for applications such as:
  • Lamination films/ Food packaging
  • Fine shrink films
  • Carrier-bag films
  • Pouches
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock (1200 ppm) 1
  • Antioxidant
  • Erucamide Slip (450 ppm)
Features 
  • Antiblocking
  • Antioxidant
  • Autoclavable
  • Low Density
  • Low Gel
  • Opticals
  • Slip
Uses 
  • Film
  • Food Packaging
  • Laminates
  • Shrink Wrap
  
RoHS Compliance 
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic)
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 1184
MD
psi
  
TD
psi
  
Tensile Strength
     ISO 1184
MD
psi
  
TD
psi
  
Tensile Elongation
     ISO 1184
MD: Break
%
  
TD: Break
%
  
Dart Drop Test (1.6 mil)
cN
 ASTM D1709
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.57 mil)
 
 ASTM D2457
Haze (1.57 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 24F564, INEOS LDPE , INEOSLDPE24F564, INEOSLDPE, LDPE 24 F 564, LDPE24F564, LDPE24, LDPE, 24 F 564, 24F564, 24F, F564, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, F24, 24LDPE
Features
Features may also be described by the following terms: Autoclavable, Autoclave, Low Gel, Low Density, Low Specific Gravity, Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock.
Uses
Uses may also be described by the following terms: Food Packaging, Shrink Wrap.
Notes
1Talc
2Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.