IDES Prospector Already have an account? Login Here

IDES

Amtai Nylon TP-4210

Polyamide 6

Supplied by Amtai's Group Inc.

The technical datasheet with complete property values for Amtai Nylon TP-4210 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Forms 
  • Granules
Physical
Nominal Value
Unit
 
Density
g/cm³
  
Apparent Density
g/cm³
  
Melt Mass-Flow Rate (MFR) (275°C/5.0 kg)
g/10 min
  
Moisture Content
ppm
  
Weight - of 100 Granules
mg
  
Mechanical
Nominal Value
Unit
 
Tensile Stress (Yield)
psi
  
Tensile Strain (Yield)
%
  
Flexural Modulus
psi
  
Flexural Strength
psi
  
Impact
Nominal Value
Unit
 
Notched Izod Impact (0.250 in)
ft·lb/in
  
Thermal
Nominal Value
Unit
 
Melting Temperature
°F
  
Additional Information
Nominal Value
Unit
 
Amino End Groups
meq/kg
  
Chip Size
mm
  
Extractables
%
  
Relative Viscosity - 96% Sulfuric Acid (77°F)
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amtai Nylon TP-4210, Amtai Nylon TP4210, Amtai Nylon , AmtaiNylonTP4210, AmtaiNylon, TP, NylonTP-4210, NylonTP4210, NylonTP:4210, NylonTP/4210, NylonTP+4210, NylonTP_4210, NylonTP 4210, NylonTP, TP-4210, TP4210, TP:4210, TP/4210, TP+4210, TP_4210, TP 4210, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Amtai, Polyamide6, Nylon6, 4210TP, 4210NylonTP
Generic Name
Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.