IDES Prospector Already have an account? Login Here

IDES

SABIC® Vestolen A 4062R 62429

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® Vestolen A 4062R 62429 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® Vestolen A 4062R 62429 (yellow) is a grade wich has a medium density and a bimodal distribution of the molecular mass. Due to its special properties this grade is highly suitable for use in gas piping, in particular - on account of its very high flexibility - for ring lines (up to a diameter of 90 mm). This material meets (inter)national standards for use in gas piping.

MRS class ISO 12162 MPa = 8.0 (PE 80).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Bimodal Molecular Weight Distribution
  • Good Flexibility
  • Medium Density
Uses 
  • Piping
Agency Ratings 
 
Appearance 
  • Yellow
Forms 
  • Pellets
  • Powder
  
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/50
Tensile Stress (Yield, 0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/50
Tensile Strain (Yield, 0.0787 in, Compression Molded)
%
 ISO 527-2/1BA/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature
°F
 DIN 53765
Oxidation Induction Time (410°F)
min
 ISO 11357-6
Additional Information
Nominal Value
Unit
Test Method
Color Number 2
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® Vestolen A 4062R 62429, SABIC Vestolen A 4062R 62429, SABIC® Vestolen A , SABIC Vestolen A, SABICVestolenA4062R62429, SABICVestolenA, A 4062 R 62429, A4062R 62429, A4062, 4062 R 62429, A4062R62429, 4062R 62429, 4062R, R62429, 4062R62429, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SABIC, PolyethyleneHighDensity, R4062, 4062A
Features
Features may also be described by the following terms: Medium Density, Medium Specific Gravity, Good Flexibility, Flexible, Bimodal, Bimodal Molecular Weight Distribution, Bimodal MW Distribution.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EN (2), ISO (2).
Notes
1Typical properties: these are not to be construed as specifications.
2Yellow
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.