SABIC Vestolen A 6060R 65307 SABIC Polyethylene, High Density

Product Description

SABIC® Vestolen A 6060R 65307 (blue) is a grade which has a high density and a bimodal distribution of the molecular mass. Due to an improved profile of properties this material offers additional security when used for drinking water piping. The material is further characterized by a significantly higher resistance to long-term loading and has a very high resistance to rapid crack propagation. Owing to a special stabilization package, good organoleptic properties are ensured with grade 6060R 65307. This material meets (inter)national standards for use in drinking water piping.
MRS class ISO 12162 MPa = 10.0 (PE 100).

SABIC® Vestolen A 6060R 65307 (blue) is a high density polyethylene (HDPE). With it's colour similar to RAL 5005 it is designed for coextrusion of blue identification stripes on potable water pipes out of SABIC® Vestolen A 6060R black . It is fully stabilized against UV- and thermal degradation.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/
medical applications.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Heat Stabilizer

UV Stabilizer

Features

Bimodal Molecular Weight Distribution

Good Crack Resistance

Good Organoleptic Properties

Heat Stabilized

High Density

Light Stabilized

Uses

Piping

Agency Ratings

Appearance

Blue

Forms

Pellets

Powder

Processing Method

Extrusion

Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg		g/10 min
190°C/5.0 kg		g/10 min
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (0.0787 in, Compression Molded)		psi	ISO 527-2/1BA/50
Tensile Stress (Yield, 0.0787 in, Compression Molded)		psi	ISO 527-2/1BA/50
Tensile Strain (Yield, 0.0787 in, Compression Molded)		%	ISO 527-2/1BA/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, Compression Molded)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Melting Temperature		°F	DIN 53765
Oxidation Induction Time (410°F)		min	ISO 11357-6
Additional Information	Nominal Value	Unit	Test Method
Color Number - RAL
MRS Classification		psi	ISO 12162
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® Vestolen A 6060R 65307, SABIC Vestolen A 6060R 65307, SABIC® Vestolen A , SABIC Vestolen A, SABICVestolenA6060R65307, SABICVestolenA, A 6060 R 65307, A6060R 65307, A6060, 6060 R 65307, A6060R65307, 6060R 65307, 6060R, R65307, 6060R65307, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SABIC, PolyethyleneHighDensity, R6060, 6060A
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Good Crack Resistance, Crack Resistant, Good Organoleptic Properties, Bimodal, Bimodal Molecular Weight Distribution, Bimodal MW Distribution, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EN (2), ISO (2).

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® Vestolen A 6060R 65307

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)