IDES Prospector Already have an account? Login Here

IDES

Topas® 5013LS-01

Cyclic Olefin Copolymer

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for Topas® 5013LS-01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Opticals
Uses 
  • Lenses
Part Marking Code (ISO 11469)
  • >COC<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)
in³/10min
 ISO 1133
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Glass Transition Temperature
°F
 ISO 11357-2
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity (5 kHz)
 
 IEC 60250
Comparative Tracking Index
V
 IEC 60112
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ISO 489
Transmittance (78.7 mil)
%
 ISO 13468-1
Haze (78.7 mil)
%
  
Abbe Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Topas® 5013LS-01, Topas 5013LS01, Topas® , Topas, Topas5013LS01, 5013 LS, 5013 LS 01, 5013LS-01, 5013LS01, 5013LS:01, 5013LS/01, 5013LS+01, 5013LS_01, 5013LS 01, 5013LS, LS01, Cyclic Olefin Copolymer, COC, Polyolefin, Polyplastics, CyclicOlefinCopolymer, LS5013
Uses
Uses may also be described by the following terms: Lenses, Lens.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.