IDES Prospector Already have an account? Login Here

IDES

WPP TPO TPO-3925

Compounded Polypropylene

Mineral Filler, 14%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP TPO TPO-3925 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Properties shown below are typical for a 14% mineral filled thermoplastic olefin alloy. Additional products are offered with properties tailored for specific applications.

TYPICAL APPLICATIONS:
Various automotive, pillar trim, scuff plates, covers and other applications.

Features and Options:
  • Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted.
  • Excellent balance of impact strength and rigidity.
  • Very good ductility and practical toughness.
  • Medium / high flow product, excellent mold ability
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mineral Filler, 14% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Ductile
  • Good Impact Resistance
  • Good Moldability
  • Good Toughness
  • Good UV Resistance
  • High Flow
  • High Rigidity
Uses 
  • Automotive Applications
  • Automotive Interior Trim
  
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
      
Yield 2
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Flexural Modulus
      
Secant  3
psi
 ASTM D790
Tangent  4
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
-22°F
ft·lb/in²
 ISO 180
73°F
ft·lb/in²
 ISO 180
Multi-Axial Instrumented Impact Energy 5
     ASTM D3763
-22°F
ft·lb
  
-4°F
ft·lb
  
Gardner Impact (-22°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240, ISO 868
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP TPO TPO-3925, WPP TPO TPO3925, WPP TPO , WPPTPOTPO3925, WPPTPO, TPO, TPOTPO-3925, TPOTPO3925, TPOTPO:3925, TPOTPO/3925, TPOTPO+3925, TPOTPO_3925, TPOTPO 3925, TPOTPO, TPO-3925, TPO3925, TPO:3925, TPO/3925, TPO+3925, TPO_3925, TPO 3925, Polypropylene, Compounded, Polypropylene Compounded, Polypropylene, PP, Washington Penn, PolypropyleneCompounded, 3925TPO, 3925TPOTPO
Features
Features may also be described by the following terms: Good Moldability, High Flow, High Melt, High MFI, Good Toughness, Tough, Good Impact Resistance, High Rigidity, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.50 in/min
40.079 in/min
521.7 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.