IDES Prospector Already have an account? Login Here

IDES

OKITEN® 222 A

Low Density Polyethylene

Supplied by DIOKI d.d.

The technical datasheet with complete property values for OKITEN® 222 A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OKITEN® 222 A is low density polyethylene, without slip agent, intended for extrusion of haevy duty blown film.

OKITEN® 222 A is characterized by excellent processing properties and thermal stability. Extruded film has very good balance of stiffness, mechanical and optical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Heat Stabilizer
Features 
  • Food Contact Acceptable
  • Good Stiffness
  • Good Thermal Stability
  • Heat Stabilized
  • Opticals
Uses 
  • Agricultural Applications
  • Blending
  • Construction Applications
  • Film
  • Heavy-duty Bags
  • Shrink Wrap
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage 2
     ISO 11501
Across Flow: 284°F, 0.00197 in
%
  
Flow: 284°F, 0.00197 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Coefficient of Friction
     ISO 8295
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Stress
     ISO 527-3
MD: Break, 2.0 mil
psi
  
TD: Break, 2.0 mil
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil
%
  
TD: Break, 2.0 mil
%
  
Trouser Tear Resistance
     ISO 6383-1
MD: 2.0 mil
lbf/in
  
TD: 2.0 mil
lbf/in
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Optical
Nominal Value
Unit
Test Method
Gloss (20°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OKITEN® 222 A, OKITEN 222 A, OKITEN® , OKITEN, OKITEN222A, 222 A, 222A, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Dioki, PolyethyleneLowDensity, A222
Features
Features may also be described by the following terms: Good Stiffness, Good Thermal Stability, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Shrink Wrap, Heavy-duty Bags, Heavy Duty Bags.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3), EC (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2dimensional change on heating
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.