Already have an account? Login Here

IDES

ADENE GHFAD

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by A.D. Compound spa

The technical datasheet with complete property values for ADENE GHFAD is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General

Material Status

Commercial: Active

Availability

Europe

North America

Filler / Reinforcement

Talc Filler, 20% Filler by Weight

Features

Detergent Resistant

Homopolymer

Uses

Appliances

Appearance

Grey

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Ash Content		%	ISO 3451-1
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain			ISO 527-2
Yield		%
Break		%
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1A
Unnotched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1U
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ADENE GHFAD, ADENE , ADENEGHFAD, GHFAD, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, A.D. Compound, PolypropyleneHomopolymer, PPHomopolymer
Features
Features may also be described by the following terms: Detergent Resistant, Detergent Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.