IDES Prospector Already have an account? Login Here

IDES

ADENE GHQAG

Polypropylene Copolymer

Talc Filler, 40%

Supplied by A.D. Compound spa

The technical datasheet with complete property values for ADENE GHQAG is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Talc Filler, 40% Filler by Weight
Features 
  • Copolymer
Appearance 
  • Grey
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Ash Content
%
 ISO 3451-1
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ADENE GHQAG, ADENE , ADENEGHQAG, GHQAG, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, A.D. Compound, PolypropyleneCopolymer, PPCopolymer
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.