IDES Prospector Already have an account? Login Here

IDES

NATUREPLAST PHI 001

Biodegradable Polymers

Supplied by NaturePLAST

The technical datasheet with complete property values for NATUREPLAST PHI 001 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PHI 001 is a thermoplastic resin of Poly (hydroxyalkanoate) made from renewable vegetable resources (55%) and is specifically developed for injection moulding.

PHI 001 is an opaque grade. It could be used on conventional injection moulding equipments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Biodegradable
  • Renewable Resource Content
  
Uses 
  • Caps
  • Disposable Tableware
  • Engineering Parts
Appearance 
  • Opaque
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Decomposition Temperature
°F
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NATUREPLAST PHI 001, NATUREPLAST , NATUREPLASTPHI001, PHI 001, PHI001, Biodegradable Polymers, Biodeg Polymers, BiodegradablePolymers, BiodegPolymers, 001PHI
Features
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Uses
Uses may also be described by the following terms: Disposable Tableware, Closure Caps, Caps, Cap, Engineering Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Injection Notes
Feed throat: 21°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.