IDES Prospector Already have an account? Login Here

IDES

Complet® LCF40-TPU 1014 NAT

Thermoplastic Polyurethane Elastomer

Long Carbon Fiber, 40%

Supplied by PlastiComp, LLC

The technical datasheet with complete property values for Complet® LCF40-TPU 1014 NAT is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Long Carbon Fiber, 40% Filler by Weight
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Complet® LCF40-TPU 1014 NAT, Complet LCF40TPU 1014 NAT, Complet® , Complet, CompletLCF40TPU1014NAT, LCF 40, LCF 40 TPU 1014 NAT, LCF40-TPU 1014 NAT, LCF40TPU 1014 NAT, LCF40:TPU 1014 NAT, LCF40/TPU 1014 NAT, LCF40+TPU 1014 NAT, LCF40_TPU 1014 NAT, LCF40 TPU 1014 NAT, LCF40, 40TPU, TPU1014, 1014NAT, LCF40TPU1014NAT, LCF40_TPU1014NAT, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, PlastiComp, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, 40LCF
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Injection Notes
Injection speed: 2 in/sec
Injection pressure: medium to maximum
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.