IDES Prospector Already have an account? Login Here

IDES

VAMPTER C 3028 V0 Grigio 3001

Polycarbonate + PBT

Glass Fiber Reinforcement, 30%

Supplied by Vamp Tech

The technical datasheet with complete property values for VAMPTER C 3028 V0 Grigio 3001 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Vampter C is PC/PBT Blend 30 % Glass Fibers Reinforced UL 94 V0, Halogen Free for Injection Moulding
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Halogen Free
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
ISO 1133
Molding Shrinkage - Flow
in/in
ASTM D955
Water Absorption (24 hr)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength
ft·lb/in²
ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0630 in
 
 
0.126 in
 
 
Glow Wire Flammability Index (0.0394 in)
°F
IEC 60695-2-12
Glow Wire Ignition Temperature (0.0394 in)
°F
IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VAMPTER C 3028 V0 Grigio 3001, VAMPTER , VAMPTERC3028V0Grigio3001, C 3028 V 0 Grigio 3001, C 3028 V0 Grigio 3001, C3028, 3028V, V0, 0Grigio, Grigio3001, C3028V0Grigio3001, Polycarbonate + PBT, Polycarbonate PBT, Polycarbonate : PBT, Polycarbonate / PBT, Polycarbonate - PBT, Polycarbonate _ PBT, Polycarbonate PBT, PC+PBT, PCPBT, PC:PBT, PC/PBT, PC-PBT, PC_PBT, PC PBT, Polycarbonate, PC, Vamp Tech, PolycarbonatePBT, Polycarbonate_PBT, 3028C
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Melt Temperature (Aim)
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.