IDES Prospector Already have an account? Login Here

IDES

ESPOLEX 3885

Thermoplastic Polyolefin Elastomer

Supplied by Sumitomo Chemical America, Inc.

The technical datasheet with complete property values for ESPOLEX 3885 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Central America
  • Europe
  • Latin America
  • North America
  • South America
Uses 
  • Automotive Exterior Parts
  • Weatherstripping
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
psi
 ISO 178
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2 (100% Strain)
psi
 ISO 37
Tensile Stress 2 (Break)
psi
 ISO 37
Tensile Elongation 2 (Break)
%
 ISO 37
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 3
     ISO 179
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 868
Shore A
 
  
Shore A, 10 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature (Type A)
°F
 ISO 812
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ESPOLEX 3885, ESPOLEX , ESPOLEX3885, 3885, TPO, Thermoplastic Polyolefin Elastomer, TPO (POE), TPO POE, Thermoplastic Elastomer, TPE, Sumitomo Chemical America, ThermoplasticPolyolefinElastomer, TPOPOE, ThermoplasticElastomer
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Injection Notes
Injection Pressure: High
Pack/Hold Pressure: 40-70% of Inj Press
Screw RPM: Slow
Part Draft: 3-6° per side
Tool Surface Finish: Light Texture
Notes
1Typical properties: these are not to be construed as specifications.
2Type 1A, 20 in/min
3Thickness: 3.2 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.