IDES Prospector Already have an account? Login Here

IDES

ESPOLEX 4855

Thermoplastic Polyolefin Elastomer

Supplied by Sumitomo Chemical America, Inc.

The technical datasheet with complete property values for ESPOLEX 4855 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Central America
  • Europe
  • Latin America
  • North America
  • South America
Uses 
  • Automotive Interior Trim
  • Hose
  • Profiles
  • Sheet
  • Tubing
Processing Method 
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/10.0 kg)
g/10 min
 ISO 1133
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2 (100% Strain)
psi
 ISO 37
Tensile Stress 2 (Break)
psi
 ISO 37
Tensile Elongation 2 (Break)
%
 ISO 37
Compression Set (158°F, 22.0 hr)
%
 ASTM D395
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 3
     ISO 179
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature (Type A)
°F
 ISO 812
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ESPOLEX 4855, ESPOLEX , ESPOLEX4855, 4855, TPO, Thermoplastic Polyolefin Elastomer, TPO (POE), TPO POE, Thermoplastic Elastomer, TPE, Sumitomo Chemical America, ThermoplasticPolyolefinElastomer, TPOPOE, ThermoplasticElastomer
Uses
Uses may also be described by the following terms: Tubing, Tube.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type 1A, 20 in/min
3Thickness: 3.2 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.