IDES Prospector Already have an account? Login Here

IDES

Hostaform® C 9021 GV3/30 TF2

Acetal (POM) Copolymer

Glass Bead, 30%

Supplied by Ticona

The technical datasheet with complete property values for Hostaform® C 9021 GV3/30 TF2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Injection molding grade with 30% glass beads, for low warpage parts, slip modified with PTFE
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Bead, 30% Filler by Weight
Additive 
  • PTFE Lubricant
  • Slip
  
Features 
  • Low Warpage
  • Lubricated
  • Slip
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Nominal Tensile Strain at Break
%
 ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 2
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostaform® C 9021 GV3/30 TF2, Hostaform C 9021 GV330 TF2, Hostaform® , Hostaform, HostaformC9021GV330TF2, C 9021 GV 3, C 9021 GV3, C 9021 GV 3 30 TF 2, C9021GV3, C 9021 GV3/30 TF2, C 9021 GV330 TF2, C 9021 GV3:30 TF2, C 9021 GV3+30 TF2, C 9021 GV3-30 TF2, C 9021 GV3_30 TF2, C 9021 GV3 30 TF2, C9021, 9021GV, GV3, 330, 30TF, TF2, C9021GV330TF2, Acetal Copolymer, Acetal Copolymer, C9021GV3_30TF2, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Ticona, AcetalPOMCopolymer, 9021C
Features
Features may also be described by the following terms: Low Warpage, Low Warp, Slip, Unspecified Slip.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Screw L/D Ratio
 
  
Injection Notes
Standard injection moulding machines with three phase (15 to 25 D)
plasticating screws will fit.
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.