IDES Prospector Already have an account? Login Here

IDES

Orevac® 18725

Polypropylene

Supplied by Arkema

The technical datasheet with complete property values for Orevac® 18725 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OREVAC 18725 is a maleic anhydride grafted polypropylene used in the manufacturing of polypropylene coatings for steel pipeline or in packaging for use as a sealing layer in co-extruded film applications

OREVAC 18725 is mainly used in pipe coating to have good adhesion performances between onto epoxy primer at low activation temperature.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good Adhesion
Uses 
  • Film
  • Packaging
  • Pipe Coatings
Processing Method 
  • Coextrusion
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
Peak Crystallization Temperature
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Orevac® 18725, Orevac 18725, Orevac® , Orevac, Orevac18725, 18725, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Arkema, PolypropyleneUnspecified, PPUnspecified
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Fittings-Channels Temperature: 220 to 230C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.