IDES Prospector Already have an account? Login Here

IDES

Honam LLDPE UF414

Linear Low Density Polyethylene

Supplied by Honam Petrochemical Corporation

The technical datasheet with complete property values for Honam LLDPE UF414 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Processability
Uses 
  • Bags
  • General Purpose
  • Industrial Applications
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Break, 1.6 mil
psi
  
TD: Break, 1.6 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.6 mil
%
  
TD: Break, 1.6 mil
%
  
Dart Drop Impact (1.6 mil)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 1.6 mil
g
  
TD: 1.6 mil
g
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.57 mil)
 
 ASTM D2457
Haze (1.57 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Honam LLDPE UF414, Honam LLDPE , HonamLLDPEUF414, HonamLLDPE, LLDPEUF 414, LLDPEUF414, LLDPE, UF 414, UF414, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Honam Petrochem, PolyethyleneLinearLowDensity, 414UF, 414LLDPEUF
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.