Already have an account? Login Here

IDES

Honam LLDPE UN314

Linear Low Density Polyethylene

Supplied by Honam Petrochemical Corporation

The technical datasheet with complete property values for Honam LLDPE UN314 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Features

Low Gel

Uses

Film

Laminates

Packaging

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Strength			ASTM D882
MD: Break, 1.6 mil		psi
TD: Break, 1.6 mil		psi
Tensile Elongation			ASTM D882
MD: Break, 1.6 mil		%
TD: Break, 1.6 mil		%
Dart Drop Impact (1.6 mil)		g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD: 1.6 mil		g
TD: 1.6 mil		g
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 1.57 mil)			ASTM D2457
Haze (1.57 mil)		%	ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Honam LLDPE UN314, Honam LLDPE , HonamLLDPEUN314, HonamLLDPE, LLDPEUN 314, LLDPEUN314, LLDPE, UN 314, UN314, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Honam Petrochem, PolyethyleneLinearLowDensity, 314UN, 314LLDPEUN
Features
Features may also be described by the following terms: Low Gel.

Notes

¹Typical properties: these are not to be construed as specifications.

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.