IDES Prospector Already have an account? Login Here

IDES

Radilene® R60D303/02

Polypropylene Homopolymer

Glass Fiber Reinforcement, 30%

Supplied by Radici Plastics

The technical datasheet with complete property values for Radilene® R60D303/02 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Chemically Coupled
  • Good Thermal Stability
  • Homopolymer
  • Low Flow
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Ae
Vicat Softening Temperature
°F
 ISO 306/A
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radilene® R60D303/02, Radilene R60D30302, Radilene® , Radilene, RadileneR60D30302, R 60 D 303, R60D303, R 60 D 303 02, R60D303/02, R60D30302, R60D303:02, R60D303+02, R60D303-02, R60D303_02, R60D303 02, R60, 60D, D303, 30302, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Radici Plastics, PolypropyleneHomopolymer, PPHomopolymer, 60R
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, Good Thermal Stability.
Injection
Nominal Value
Unit
 
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.