IDES Prospector Already have an account? Login Here

IDES

Adstif EA648P

Polypropylene Impact Copolymer

Supplied by PolyMirae

The technical datasheet with complete property values for Adstif EA648P is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Adstif" EA648P is a medium flow heterophasic copolymer development grade with outstanding mechanical properties. The product features an easy processability and an excellent stiffness combined with good impact properties and good gloss.

"Adstif" EA648P resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

"This is a developmental grade, changes in formulation and specification are possible. The information is valid at the time of writing. We suggest customers to check and confirm with us the most updated statements from time to time".
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Processability
  • Medium Flow
  • Medium Gloss
Uses 
  • Appliances
  • Consumer Applications
  • Electrical/Electronic Applications
  • Furniture
  • Packaging
Agency Ratings 
RoHS Compliance 
Physical
Nominal Value
Unit
Test Method
Density
      
--
g/cm³
 ISO 1183
--
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2
Tensile Strength (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
 
  
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ISO 306
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Adstif EA648P, Adstif , AdstifEA648P, EA 648 P, EA648P, EA648, 648P, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, PolyMirae, PolypropyleneImpactCopolymer, PPImpactCopolymer, 648EA
Features
Features may also be described by the following terms: Medium Gloss, Good Impact Resistance, Medium Flow, Medium Melt, Medium MFI, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.