IDES Prospector Already have an account? Login Here

IDES

Network Polymers SBS 1000

Styrene Butadiene Styrene Block Copolymer

Supplied by Network Polymers, Inc.

The technical datasheet with complete property values for Network Polymers SBS 1000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
Agency Ratings 
Appearance 
  • Clear/Transparent
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) 2 (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Break)
psi
 ASTM D638
Flexural Modulus 4
psi
 ASTM D790B
Flexural Strength 4
psi
 ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 5
Optical
Nominal Value
Unit
Test Method
Haze
%
 ASTM D1003
Color, Yellowness Index 6
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Network Polymers SBS 1000, Network Polymers SBS , NetworkPolymersSBS1000, NetworkPolymersSBS, SBS 1000, SBS1000, SBS, 1000, Styrene Butadiene Styrene Block Copolymer, Thermoplastic Elastomer, TPE, Network Poly, StyreneButadieneStyreneBlockCopolymer, ThermoplasticElastomer, 1000SBS
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Injection Notes
Injection Speed: 0.5 in/sec
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
32.0 in/min
4Method I (3 point load), 0.050 in/min
5Loading 1 (10 N)
6BAM 1015
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.