Tecnoflon® VPL 85730 / VPL 45730

TECNOFLON VPL 85730 and VPL 45730 are a brand new generation of very low temperature peroxide curable fluoroelastomer with outstanding low temperature flexibility (TR10 = -30°C). Furthermore, they show an improved chemical resistance if compared to Tecnoflon PL grades with similar TR10.
Like all other Tecnoflon peroxide curable grades, they exhibit excellent processability; moreover they need very short post-curing cycles.

Some of the basic properties of Tecnoflon® VPL 85730 and VPL 45730 are:

• Outstanding low temperature flexibility

• Excellent chemical resistance

• Low post cure

• Superior mold flow

• Lack of mold fouling

• Excellent mold release

Tecnoflon VPL 85730 and VPL 45730 can be used for compression, injection, injection-compression and transfer molding of Orings, gaskets and seals. Tecnoflon VPL 85730 and VPL 45730 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
These materials can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.