IDES Prospector Already have an account? Login Here

IDES

MEGOLON™ HF 8037 DD

Thermoplastic

Supplied by AlphaGary

The technical datasheet with complete property values for MEGOLON™ HF 8037 DD is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MEGOLON HF 8037 DD IS A LOW DIE DROOL, FLAME RETARDED, ZERO HALOGEN JACKETING COMPOUND.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Flame Retardant
  • Halogen Free
  
Uses 
  • Cable Jacketing
Appearance 
  • Natural Color
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/10.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (0.0300 in)
psi
 ASTM D638
Tensile Elongation (Break, 0.0300 in)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore A, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Hot Pressure Test 2 (176°F)
%
 IEC 60811-3-1
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air 3
     Internal Method
257°F, 168 hr
%
  
277°F, 168 hr
%
  
Change in Ultimate Elongation in Air 3
     Internal Method
257°F, 168 hr
%
  
277°F, 168 hr
%
  
Change in Tensile Strength 3 (250°F, 18 hr, in ASTM #2 Oil)
%
 Internal Method
Change in Ultimate Elongation 3 (250°F, 18 hr, in ASTM #2 Oil)
%
 Internal Method
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.125 in)
%
 ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Alpha Gary

Product names can be difficult to match. You may have searched any one of these terms to find this product: MEGOLON™ HF 8037 DD, MEGOLON HF 8037 DD, MEGOLON™ , MEGOLON, MEGOLONHF8037DD, HF 8037 DD, HF8037, 8037DD, HF8037DD, Thermoplastic, Unspecified, Thermoplastic Unspecified, TP, Unspecified, TP Unspecified, AlphaGary, ThermoplasticUnspecified, TPUnspecified, 8037HF
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw Compression Ratio: 1.5:1 to 2.5:1
Notes
1Typical properties: these are not to be construed as specifications.
2% Loss
3thickness: 30 mil
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.