IDES Prospector Already have an account? Login Here

IDES

InnoPlus HD3200B

High Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus HD3200B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
InnoPlus HD3200B is high density polyethylene blow molding grade which can be used with high speed blow molding machine and also have special feature of excellent surface glossness to enhance the image of products.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • High Gloss
 
Uses 
  • Bottles
  • Cosmetic Packaging
  • Fruit Juice Bottles
  • Personal Care
 
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (25% Igepal, F50)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
    ASTM D638
Yield
psi
 
Break
psi
 
Tensile Elongation (Break)
%
ASTM D638
Apparent Bending Modulus
psi
ASTM D747
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 2
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525 3
Melting Temperature
°F
ASTM D2117
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus HD3200B, InnoPlus , InnoPlusHD3200B, HD 3200 B, HD3200B, HD3200, 3200B, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PTT Chemical, PolyethyleneHighDensity, 3200HD
Features
Features may also be described by the following terms: High Gloss.
Uses
Uses may also be described by the following terms: Fruit Juice Bottles, Fruit Juice Bottle, Cosmetic Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Partial break
3Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.