IDES Prospector Already have an account? Login Here

IDES

Ultraform® W2320 003 PRO

Acetal (POM) Copolymer

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultraform® W2320 003 PRO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower.

Ultraform® W2320 003 PRO was tested according to the following requirements and is compliant with them: Biocompatibility-Tests according US Pharmacopeia Class VI, EU Pharmacopeia (EP IV Chap. 3.2.2), ISO 10993-5. However, this is not a sufficient qualification for the use of the product in the field of medical devices or pharmaceutical applications. The manufacturer has to ensure in any case that the medical device or pharmaceutical application manufactured using BASF plastics is safe, lawful and technically suitable for the intended use.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Flow
  • Good Processability
  
Agency Ratings 
 
Forms 
  • Granules
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • POM
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
 ISO 1133
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/50
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2/50
Tensile Creep Modulus 2 (1000 hr)
psi
 ISO 899-1
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Maximum Use Temperature - Short Cycle Operation
°F
  
Melting Temperature
°F
 ISO 11357-3
CLTE - Flow (73 to 131°F)
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity (73°F, 1 MHz)
 
 IEC 60250
Dissipation Factor (73°F, 1 MHz)
 
 IEC 60250
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
Nominal Value
Unit
Test Method
Automotive Materials (> 39.4 mil)
 
 FMVSS 302
ISO Type
 
 ISO 9988-1
Polymer Abbreviation
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultraform® W2320 003 PRO, Ultraform W2320 003 PRO, Ultraform® , Ultraform, UltraformW2320003PRO, W 2320 003 PRO, W2320 003 PRO, W2320, 2320003, 003PRO, W2320003PRO, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, BASF, AcetalPOMCopolymer, 2320W
Features
Features may also be described by the following terms: Good Flow, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1), ISO (1), USP (1), EP (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Strain: <= 0.5%, 23°C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.