InnoPlus HD6000F PTT Chemical Polyethylene, High Density

Product Description

InnoPlus HD6000F is high density polyethylene film grade which has special feature of output increment, good processability and drawdownability. This grade is suitable for high productivity or high speed machine to produce ultra thin films and general purpose films. InnoPlus HD6000F exhibits high mechanical strength, good stiffness and good heat sealability.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Features

Fast Molding Cycle

Food Contact Acceptable

Good Drawdown

Good Heat Seal

Good Processability

Good Stiffness

Good Strength

Uses

Bags

Film

Laundry Bags

Agency Ratings

RoHS Compliance

Forms

Pellets

Processing Method

Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (25% Igepal, F50)		hr	ASTM D1693B
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield		psi
Break		psi
Tensile Elongation (Break)		%	ASTM D638
Apparent Bending Modulus		psi	ASTM D747
Flexural Modulus		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact²		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525³
Melting Temperature		°F	ASTM D2117
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus HD6000F, InnoPlus , InnoPlusHD6000F, HD 6000 F, HD6000F, HD6000, 6000F, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PTT Chemical, PolyethyleneHighDensity, 6000HD
Features
Features may also be described by the following terms: Good Strength, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Drawdown, Good draw down, Good Processability, Easy Processing, Good Heat Seal, Good Stiffness.
Uses
Uses may also be described by the following terms: Laundry Bags.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Cylinder Zone 5 Temp.		°F
Die Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Non break

³Rate A (50°C/h), Loading 1 (10 N)

InnoPlus HD6000F

High Density Polyethylene

Supplied by PTT Chemical Public Company Limited