IDES Prospector Already have an account? Login Here

IDES

InnoPlus HD6376EB

High Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus HD6376EB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
InnoPlus HD6376EB is black compounded high density polyethylene extrusion grade for cable jacket like fiber optic. This grade provide excellent UV and weathering resistance, abrasion resistance and low shrink back.

Material Specification : Black compounded InnoPlus HD6376EB meet the following requirement of
  • ASTM D1248 : Type III, Class C, Category 5, Grade J5
  • BS 6234 : Type H03C, TS2
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Carbon Black (25000 ppm) 1
  • UV Stabilizer
  
Features 
  • Food Contact Acceptable
  • Good Abrasion Resistance
  • Good UV Resistance
  • Good Weather Resistance
  • Low Shrinkage
Uses 
  • Cable Jacketing
Agency Ratings 
RoHS Compliance 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
     ASTM D1505
-- 3
g/cm³
  
-- 4
g/cm³
  
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (25% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 5
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 ASTM D2117
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity 6
ohm·cm
 ASTM D257
Dielectric Constant (1 MHz)
 
 ASTM D150
Dissipation Factor (1 MHz)
 
 ASTM D150
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus HD6376EB, InnoPlus , InnoPlusHD6376EB, HD 6376 EB, HD6376EB, HD6376, 6376EB, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PTT Chemical, PolyethyleneHighDensity, 6376HD
Features
Features may also be described by the following terms: Low Shrinkage, Good Abrasion Resistance, Abrasion Resistant, Good Weather Resistance, Weather Resistant, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ASTM (1), FDA (1), BS (1).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1ASTM D4218
2Typical properties: these are not to be construed as specifications.
3Base
4Black
5Non break
6DC 500V
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.