IDES Prospector Already have an account? Login Here

IDES

InnoPlus HD7000H

High Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus HD7000H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
InnoPlus HD7000H is high density polyethylene which has outstanding mechanical strength, good weathering resistance and excellent product appearance. It is suitable to produce not only truck-bed liner from sheet extrusion and thermoforming process but also automotive fuel tanks from blow molding process.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Weather Resistance
  • High Strength
  • Pleasing Surface Appearance
  
Uses 
  • Fuel Tanks
  • Liners
  • Sheet
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (25% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 2
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 3
Melting Temperature
°F
 ASTM D2117
Additional Information
Nominal Value
Unit
Test Method
Blow Molding Temperature
°F
  
Thermoforming Molding Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus HD7000H, InnoPlus , InnoPlusHD7000H, HD 7000 H, HD7000H, HD7000, 7000H, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PTT Chemical, PolyethyleneHighDensity, 7000HD
Features
Features may also be described by the following terms: High Strength, Good Weather Resistance, Weather Resistant, Pleasing Surface Appearance.
Uses
Uses may also be described by the following terms: Fuel Tanks.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Non break
3Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.