IDES Prospector Already have an account? Login Here

IDES

InnoPlus HD8000F

High Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus HD8000F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
InnoPlus HD8000F is high density polyethylene film grade which has high molecular weight and possesses broad molecular weight distribution. This grade exhibits excellent mechanical strength even low gauges, very high impact strength, good stiffness and good heat sealability. InnoPlus HD8000F is suitable for wide film and heavy duty applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Heat Seal
  • Good Impact Resistance
  • Good Stiffness
  • Good Strength
  • High Molecular Weight
  • Med.-Wide Molecular Weight Distrib.
Uses 
  • Film
  • Heavy-duty Bags
  • Liners
  • Sheet
  • Table Products
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (25% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 2
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 3
Melting Temperature
°F
 ASTM D2117
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus HD8000F, InnoPlus , InnoPlusHD8000F, HD 8000 F, HD8000F, HD8000, 8000F, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PTT Chemical, PolyethyleneHighDensity, 8000HD
Features
Features may also be described by the following terms: Good Strength, Good Impact Resistance, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, High Molecular Weight, High MW, Good Heat Seal, Good Stiffness.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Non break
3Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.